7S 24V Lithium Battery 3.7V Power Protection Board 70A

R 995.00 ~~R 1,195.00~~

Quantidade

7S 24V Lithium Battery 3.7V Power Protection Board with Temperature Protection Equalization Function, Overcurrent Protection - 70A (10004046)

Description:

Range: nominal voltage is 3.6V, 3.7V lithium battery (including 18650, 26650, polymer battery).

Function: Overcharge protection function, over discharge protection function, over current protection function, short circuit protection function, battery balance management function, temperature protection function.

Products: 7S or more adopts Zhongying integrated scheme circuit, and 7S or less adopts single-section cascade scheme circuit.

Charging

Charge current: Same as continuous current

Charging voltage：29.75V

Over charge protection

Overcharge detection voltage：4.25V±0.05V

Overcharge release voltage：4.15V±0.05V

Overcharge protection delay：600uS

Over discharge protection

Over discharge protection voltage: 2.7V ± 0.1V

Over discharge release voltage：3V±0.05V

Over discharge detect delay：600uS

Balance

Balance detection voltage：4.18V

Balanced release voltage：4.18V

Balance current：35mA±5mA

Overcurrent protection

Instantaneous current: continuous current * 2.5

Overcurrent detection delay：600uS

Overcurrent detection voltage：100mV

Overcurrent protection release condition: Disconnect load

Short circuit protection

Short circuit protection condition: External load short circuit

Short circuit detection delay：600uS

Short circuit protection release condition; Disconnect load

Temp Protection

Charging temperature: ≤65 ℃

Discharge temperature: ≤65℃

Remove temperature control protection: within working temperature

Inner resistance

Main circuit on-resistance：≤10mΩ

Self electricity consume

Working current：≤100uA

Sleep current (when the battery is over-discharged)：≤20uA

Working Temp

temperature range：-20℃/+80℃

Package Contents:

1 x 7S 24V Lithium Battery 3.7V Power Protection Board 70A

Use the queue of operations:
1. The cable starts from the black thin wire connecting B-, the second wire (the thin red wire) is connected to the positive pole of the first battery, and the positive pole of each battery is connected in turn until the last red wire is connected to B+;
2. After connecting the cable, do not insert the plug directly into the BMS. Measure the voltage between each two adjacent metal terminals on the back of the plug. If the voltage of the terpolymer battery should be between 2.8V and 4.2V, the iron-lithium battery should be between 2.5V and 3.65V.
3. After correct wiring queue and voltage confirmation, insert the BMS socket.
4. The protective board B line (blue thick line) is connected to the negative pole of the battery pack.
5. After the wiring is completed, measure whether the total voltage of the battery pack and the total voltage passing through the BMS are equal. If they are different, check again according to the above wiring queue.

Tips:
The battery pack protection board, which is a semi-finished product of electronic products, is a wearing part in case of wrong use. If you don't understand how to use it, please read the manual carefully or ask the customer service. Any wrong use will burn out the front-end sampling resistor. We will not accept such disputes of customer damage. Please do not buy if you mind.