Z10 Dual USB 10A 12v/24v Solar Charge Controller PWM Charging for Solar Off-grid System (10006760)
The Z10 Dual USB 10A 12v/24v Solar Charge Controller is a reliable and efficient device that optimizes the charging process for solar panels. With its dual USB ports, it allows for simultaneous charging of two devices. The controller is equipped with advanced technology to prevent overcharging, short circuit, and reverse polarity, ensuring the safety of your solar panel system. Its 10A capacity makes it suitable for both 12V and 24V systems. The controller also features an easy-to-read LCD display that provides real-time information about the charging status. With its compact size and easy installation, the Z10 Dual USB 10A 12v/24v Solar Charge Controller is a must-have for any solar power enthusiast.
Build-in industrial micro controller.
Fully 4-stage PWM charge management.
One-key setting, digital display, auto memory function.
Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
Buck charge: 28.8V
Float charge: 27.4V
USB output: 5V/3A
Discharge stop: 21.4V
Voltage: DC 12V/24V
Max solar input: <50V
Rated working current: ≤20A
Discharge reconnect: 25.2V
Working temperature: -35℃~60℃
Output voltage: 12V/24V Automatically distinguish voltage
With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System):
-For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage.
-For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL (It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
1X Solar panels Battery Charge Controller 10A
1X User Manual