Andowl Q-KG09 433mhz Wireless1 Way AC 220v Wall Switch

Description

Andowl Q-KG09 433mhz Wireless Wall Light Switch AC220V for Home Lighting (10005499)

Specifications:

Input Voltage : AC 90-250V
Max Current : 10A
Wireless Type : 2.4GHz
Wireless standard : IEEE 802 .11 b/g/n
Remote ON/OFF: Turn electrical devices on/off from anywhere
Scene: Turn on/off a gang of devices with one tap

Specifications for Wall Switch

Operating Frequency: 433.92MHz
Battery Model: CR2032 (Not included)
Dimensions: 86mm x 86mm x 14mm
Distance: indoor (20 meters) outdoor (80 meters)

About receiver’s Working Mode:

Momentary mode: Press the Remote control button, the receiver’s relay is ON; release button, the receiver’s relay is OFF.
Toggle mode: Press Remote control button for 1 time, the receiver’s relay is ON; press button again, the receiver’s relay is OFF.
Latched mode: Press Remote control button A, the receiver’s relay is ON, Press the transmitter’s button B, the receiver’s relay is OFF.
Reset function: After push the receiver’s learning button 8 times, the receiver Clear all the remote control data in its memory.
When the red LED flashes for a few times, it indicates that the clear function is completed.
(After cleared the code in the receiver, all the remote control cannot work with the receiver.)

Matching method:
1. Setting momentary Mode:
Press the receiver’s Learning button 1 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s button, the receiver’s red LED will flash then come off, Setting successfully.
2. Setting Toggle Mode (Common working mode):
Press the receiver’s Learning button 2 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s button, the receiver’s red LED will flash then come off, Setting successfully.
3. Setting Latched Mode:
(Note: When you choose “Latched Mode”, you need to setting two different buttons on the Remote control, the first time learn is for “ON”, the second time learn for “OFF”.
For example: button A = ON, button B = OFF)
Press the receiver’s Learning button 3 time, the receiver’s red LED will be lights up, it comes into Setting state; Press the remote’s A button, the receiver’s red LED will flash and then remains lit; Then press the remote’s B button, the receiver’s red LED will flash then come off, Setting successfully.

Note:
A Smart Switch can only store 12 buttons (on the remote). Saved button number of more than 12, it will cause all of the stored remote control cannot control the Smart Switch. You need reboot the power and reset the RF remote control settings (press the Smart Switch’s matching button 8 times)